OBO Bettermann Lightning Systems

Product Details:

Features:

• According to DIN EN 62561-2 (VDE 0185-561-2)
• Corresponds to the requirements of VDE 0185-305 (IEC 62305)
• RD 8 ALU: Semi-hard (E-AlMgSi0.5 corresponds to DIN 48801)
• RD 8 ALU-T: Can be subjected to torsion (E-AlMgSi0.5 corresponds to DIN 48801)
• RD 10 ALU: Pure aluminium (E-Al corresponds to DIN 48801)
• AL and ALMgSi may not be routed directly on, in or under plaster, mortar or concrete, nor routed in the earth

Product Details:

The OBO Bettermann LSC I II Surge Protection Device lightning current meter measures and permanently saves pulse currents, together with the date and time. This ensures constant monitoring in order to notice if any lightning has struck the lightning protection system. Should this be the case, then the lightning protection system must be maintained according to VDE 0185-305 (IEC 62305).

Features:

• Saving and display of time and date
• Usable both inside and outside due to its protection class of IP 65
• Cable clip for round conductor or flat conductor
• Direct mounting on the arrester or the PE cable of the surge protection device
• Long lifespan of the internal lithium batteries
• LCD display
• Internal battery

Product Details:

Features:

• PCS magnetic card to record pulse/lightning currents including holder
• Holder can be leaded
• For mounting on round conductor Rd 8-10
• Simple holder mounting through clamping
• 1 PU = 10 units

Product Details:

Folding tripod stand for screwless installation of free-standing air-termination rods with a diameter of 40 mm, e.g. for OBO isCon® conductors. Roof slope to max. 5 degrees. Incl. Rd 8−10 crossbarfor rapid round conductor fastening. The concrete plinth and threaded rods are to be ordered separately.

Product Details:

We are offering OBO Bettermann Lightning rod to our clients.

Other Details:

• Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4
• Tapered air-termination rod
• Suitable for 40 mm isFang tripod stand and isFang support systems